Waterjet Intensifier Pumps

Easy to Operate. Easy to Maintain.

WARDJet offers a full range of reliable, efficient waterjet intensifier pumps. These waterjet pumps are designed for around-the-clock operations, small prototype jobs, and every application in between. All WARDJet pumps are engineered to be easy to operate – and even easier to maintain. WARDJet offers a full line of service, support and parts for all makes and models of waterjet pumps. WARDJet’s team of expert field technicians can also service your existing equipment, even if it isn’t a WARDJet pump.

Reduced Maintenance

The WARDJet pump strikes the perfect balance between long maintenance intervals and high speed cutting.

Simple Control

Control your pump remotely, directly from your WARDJet controller.

Consistent, Reliable Operation

WARDJet intensifiers are designed for either 60k or 90k PSI water on demand, just when you need it.

WARDJet waterjet pumps

Available in sizes ranging from 30 to 100 HP. WARDJet pumps deliver consistent cut quality at optimal cutting speeds and a design that simplifies service so maintenance is faster, easier, and less expensive. At the same time, WARDJet pumps include features like fully integrated cooling for a smaller footprint that enables easy integration into small spaces.

Imperial

Model	Max Ouput Flow	Max Orifice	Max Pressure	Intensifier Configuration	Sound level, Max.	Power	Cooling Type	Motor Starter
WARDJet 30	0.6 GPM	0.011"	60,000 PSI	Single	≤78	30HP	Air or Water	Soft Start
WARDJet 50	1.0 GPM	0.014"	60,000 PSI	Single	≤79	50HP	Air or Water	Soft Start
WARDJet 60	1.3 GPM	0.016"	60,000 PSI	Single	≤82	60HP	Air or Water	Soft Start
WARDJet 75	1.5 GPM	0.017"	60,000 PSI	Dual	≤78	75HP	Air or Water	Soft Start
WARDJet 100	2.0 GPM	0.02"	60,000 PSI	Dual	≤78	100HP	Air or Water	Soft Start
WARDJet Servo 50	1.0 GPM	0.014"	60,000 PSI	Single or Redundant	≤73	50HP	Air, Water, Dual	Soft Start
WARDJet Servo 60	1.2 GPM	0.016"	60,000 PSI	Single or Redundant	≤74	60HP	Air, Water, Dual	Soft Start
WARDJet 90K	0.92 GPM*	0.012"	90,000 PSI	Single or Redundant	≤85	75HP	Air or Water	Soft Start
* With 0.030 Nozzle

Metric

Model	Max Ouput Flow	Max Orifice	Max Pressure	Intensifier Configuration	Sound level, Max.	Power	Cooling Type	Motor Starter
WARDJet 30	2.30 LPM	0.28 mm	4,000 bar	Single	≤78	22 kW	Air or Water	Soft Start
WARDJet 50	3.80 LPM	0.356 mm	4,000 bar	Single	≤79	37 kW	Air or Water	Soft Start
WARDJet 60	4.90 LPM	0.406 mm	4,000 bar	Single	≤82	45 kW	Air or Water	Soft Start
WARDJet 75	6.00 LPM	0.43 mm	4,000 bar	Dual	≤78	55 kW	Air or Water	Soft Start
WARDJet 100	7.60 LPM	0.0508 mm	4,000 bar	Dual	≤78	75 kW	Air or Water	Soft Start
WARDJet Servo 50	3.80 LPM	0.35 mm	4,000 bar	Single or Redundant	≤73	37 kW	Air, Water, Dual	Soft Start
WARDJet Servo 60	4.60 LPM	0.4 mm	4,000 bar	Single or Redundant	≤74	45 kW	Air, Water, Dual	Soft Start
WARDJet 90K	3.50 LPM*	0.3 mm	6,000 bar	Single or Redundant	≤85	55 kW	Air or Water	Soft Start
* With 0.762 Nozzle

Orifice combinations supported by the WARDJet pumps

Ecotron 30

Orifice size	in (mm)
1 orifice	0.011 (0.28)
2 orifices	0.007 (0.18)
3 orifices	0.006 (0.15)
4 orifices	0.005 (0.13)
5 orifices	0.004 (0.10)
6 orifices	–

Ecotron 50

Orifice size	in (mm)
1 orifice	0.014 (0.35)
2 orifices	0.010 (0.25)
3 orifices	0.008 (0.20)
4 orifices	0.007 (0.18)
5 orifices	0.006 (0.15)
6 orifices	0.005 (0.13)

Nozzle and Orifice Combinations

Orifice	Nozzle	Abrasive (lb/min)	Abrasive mesh
0.007	0.020	0.25	120 – 220
0.009	0.030	0.4 – .6	80 – 120
0.010	0.030	0.5 – .75	80 – 120
0.013	0.040	1.0 – 1.25	60 – 80
0.014	0.040	1.1 – 1.35	60 – 80
0.015	0.040	1.25 – 1.5	60 – 80
0.016	0.040	1.3 – 1.5	60 – 80

HP	Qty heads	Orifice/Nozzle
30	1	.010/.030
30	2	.006 water-only
50	1	.014/.040
50	2	.010/.030

Power vs. flow for WARDJet waterjet pumps

Model	Power		Pressure		Max. output flow		Max. orifice size
	hp	kW	PSI	bar	GPM	L/min	in	mm
WARDJet 30	30	22	60,000	4,000	0.60	2.30	0.011	0.28
WARDJet 50	50	37	60,000	4,000	1.00	3.80	0.014	0.356

KMT Waterjet Pumps

Global Cutting Power, Offered by WARDJet

KMT STREAMLINE® and CLASSIC pumps are proven performers across the globe — offering modular design, long-stroke efficiency, and horsepower options from 15 to 200 HP. Ideal for customers who want ultra-high pressure or specific pump customization, KMT pumps are fully compatible with WARDJet cutting systems.

Key Features:

Up to 90,000 PSI operating pressure
Long-stroke intensifier for reduced component wear
20-minute seal change accessibility
No topworks removal for service
Seamless fit with both new and existing WARDJet tables
Perfect for robotic trimming, 5-axis, and heavy-duty 24/7 cutting environments

KMT Pump Overview (Summary Table)

Model	HP	Max Pressure	Max Flow Rate	Dimensions (L×W×H)	Weight
SL-VI 15	15	60,000 PSI	0.30 GPM	56" × 28" × 33"	1,800 lbs
SL-VI 50	50	60,000 PSI	~1.0 GPM	60" × 36" × 36"	~2,200 lbs
SL-VI 100	100	60,000 PSI	~2.0 GPM	64" × 36" × 38"	~3,200 lbs
SL-VI 200	200	60,000 PSI	~3.9 GPM	80" × 42" × 48"	~4,800 lbs
PRO 60/90K	60	90,000 PSI	~1.0 GPM	Varies by model	Varies
PRO 125/90K	125	90,000 PSI	~2.0 GPM	Varies by model	Varies

WARDJet Support — No Matter the Pump

Every pump we offer is fully backed by our experienced team of service technicians, with:

On-site and remote troubleshooting
Preventative maintenance plans
Genuine parts for BFT and KMT systems
Expert installation and operator training

Ready to Compare Pump Options? – Get in Touch

180 South Ave. PO Box 517 Tallmadge, OH 44278 USA

+1 330 677 9100

Global Presence

With operations in over 180 countries, we’re never far from providing you with expert support and service.

North America

USA, Canada, Mexico

Europe

UK, Germany, France, Poland, Italy

Asia Pacific

China, India, Australia, Japan

Middle East

UAE, Saudi Arabia, Turkey

Abrasive Systems

Water Only Systems